Top Shipping Companies For 2014

There are signs that the global economy is continuing to struggle slowly towards a recovery.

It has been a series of two steps forward, one step back and may continue in that fashion for some time. But it is ever so slowly getting better around the world. Europe showed some slight signs of improvement this past week and China released economic information that indicates growth is stabilizing in that very important economic region. Mexico raised its estimate of 2014 growth up to 4 percent on Friday.

The global economy is not great and probably doesn't even fit the definition of good, but it is getting better. This bodes well for the recovery of one of the most damaged sectors of the economy. Conditions have been brutal for the shipping industry and the stock prices reflect that fact.

If it could go wrong, it did go wrong for this industry. Leading up to the bust in 2007, shipping companies ordered too many new ships and capacity was far too high especially after the global economy came crashing to the ground. Lease rates collapsed as too many ships were competing for too little business.

Top 5 High Tech Stocks To Watch Right Now: Monro Muffler Brake Inc.(MNRO)

Monro Muffler Brake, Inc. provides automotive undercar repair and tire services. The company offers a range of services on passenger cars, light trucks, and vans for brakes; mufflers and exhaust systems; and steering, drive train, suspension, and wheel alignment. It also provides other products and services, including tires and routine maintenance services, including state inspections. The company?s maintenance services include oil change, heating and cooling system flush and fill service, belt installation, fuel system service, and a transmission flush and fill service. In addition, it replaces and services batteries, starters, and alternators, as well as offers air conditioning services. As of June 25, 2011, the company had 802 company-operated stores and 3 franchised locations. It operates stores primarily under the Monro Muffler Brake & Service, Tread Quarters Discount Tire, Mr. Tire, Autotire Car Care Center, and Tire Warehouse names in New York, Pennsylvania, Ohio, Connecticut, Massachusetts, West Virginia, Virginia, Maryland, Vermont, New Hampshire, New Jersey, North Carolina, South Carolina, Indiana, Rhode Island, Delaware, Maine, Illinois, and Missouri. Monro Muffler Brake, Inc. was founded in 1957 and is headquartered in Rochester, New York.

Advisors' Opinion:

• [By Seth Jayson]

  Calling all cash flows
  When you are trying to buy the market's best stocks, it's worth checking up on your companies' free cash flow once a quarter or so, to see whether it bears any relationship to the net income in the headlines. That's what we do with this series. Today, we're checking in on Monro Muffler Brake (Nasdaq: MNRO  ) , whose recent revenue and earnings are plotted below.

• [By Seth Jayson]

  Monro Muffler Brake (Nasdaq: MNRO  ) reported earnings on May 21. Here are the numbers you need to know.

  The 10-second takeaway
  For the quarter ended March 30 (Q4), Monro Muffler Brake beat expectations on revenues and met expectations on earnings per share.

• [By kcpl]

  Monro Muffler Brake (MNRO) is a popular name in the DIFM & Services segment, while Pep Boys - Manny, Moe & Jack (PBY) is a hybrid of DIFM-DIY. The present perspective seems bright for such aftermarket service providers. However, these two are entirely different from aftermarket retailers such as Advance Auto Parts (AAP). Let us take a look at the present aftermarket scenario and its prospects.

Top Shipping Companies For 2014: ePlus Inc.(PLUS)

ePlus inc., through its subsidiaries, engages in selling, leasing, financing, and managing information technology (IT) and other assets in the United States. Its Technology Sales segment involves in the direct marketing of IT equipment and third-party software solutions of Cisco Systems, HP, VMWare, NetApp, IBM, and Microsoft; and the provision of proprietary software for enterprise supply management, including order-entry and order-management, procurement, spend management, asset management, document management, distribution, and electronic catalog content management software and services. This segment also provides professional technology services in the areas of data center, storage, security, cloud enablement, and IT infrastructure that cover Internet telephony and communications, collaboration, cloud computing, virtual desktop infrastructure, network design and implementation, storage, security, virtualization, business continuity, visual communications, audio/visual technologies, maintenance, and implementation services. The company?s Financing segment offers a range of leasing and financing options for IT and capital assets, such as computers, associated accessories and software, communication-related equipment, medical equipment, industrial machinery and equipment, office furniture and general office equipment, transportation equipment, and other general business equipment. It also leases and finances equipment, as well as supplies software and services directly and through relationships with vendors and equipment manufacturers. ePlus sells its products primarily through direct sales force, inside sales representatives, and business development associates to commercial customers; federal, state, and local governments; K-12 schools; and higher education institutions. The company was formerly known as MLC Holdings, Inc. and changed its name to ePlus inc. in 1999. ePlus was founded in 1990 and is headquartered in Herndon, Virginia.

Advisors' Opinion:

• [By alicet236]

  ePlus Inc. (PLUS): President and CEO, 10% Owner Phillip G. Norton Sold 198,730 Shares

  President and CEO, 10% Owner of ePlus Inc. (PLUS) Phillip G. Norton sold 198,730 shares on 05/05/2014 at an average price of $47.5. ePlus Inc. was founded in 1990 and is a Delaware corporation and began using the name ePlus inc. ePlus Inc. has a market cap of $401.106 million; its shares were traded at around $49.74 with a P/E ratio of 11.50 and P/S ratio of 0.38. ePlus Inc. had an annual average earnings growth of 6.70% over the past 10 years. GuruFocus rated ePlus Inc.�the business predictability rank of 2-star.

• [By Seth Jayson]

  Calling all cash flows
  When you are trying to buy the market's best stocks, it's worth checking up on your companies' free cash flow once a quarter or so, to see whether it bears any relationship to the net income in the headlines. That's what we do with this series. Today, we're checking in on ePlus inc. (Nasdaq: PLUS  ) , whose recent revenue and earnings are plotted below.

Top Shipping Companies For 2014: AZ Electronic Materials SA (AZEM)

AZ Electronic Materials SA is a producer and supplier of specialty chemical materials. AZ operates in four segments: IC Materials, which includes products for use in integrated circuits and devices; Optronics, which includes products used in the production of flat panel displays for use in televisions, computer monitors and similar equipment and light emitting diode technology; Printing and Other, which includes printing and similar products used in photo lithographic processes, and Corporate. The Company�� products enable the manufacture of integrated circuits (ICs) and flat panel displays (FPDs) that are integral to a range of electronic devices and applications, including computers and tablet devices, flat screen televisions, mobile communication devices, industrial and automotive applications and the developing light and energy markets. Advisors' Opinion:

• [By Corinne Gretler]

  AZ Electronic (AZEM) surged 43 percent, the most since its at least November 2010, after Merck on Dec. 5 said it had agreed to buy the company for about 1.6 billion pounds. Merck added 0.4 percent. Shareholders will get 403.5 pence for each share, Merck said. The price is 53 percent above the Dec. 4 closing level in London trading.

Top Shipping Companies For 2014: Camtek Ltd (CAMT)

Camtek Ltd. (Camtek), incorporated in 1987, designs, develops, manufactures and markets automated solutions dedicated for enhancing production processes and yield for the semiconductor manufacturing and packaging and the printed circuit board (PCB) and integrated circuit (IC) substrate industries. Camtek also designs, develops, manufactures and markets automated optical inspection (AOI), systems and related products. The Company�� AOI systems are used to enhance both production processes and yields for manufacturers in the semiconductor manufacturing and packaging industry and PCB and IC Substrate industry. Through the acquisition of Printar's assets, it also engaged in developing, manufacturing, sale and marketing of direct digital material deposition systems and inks for the PCB industry, with two major fields of activity: Solder Mask and Legend. In addition, through the acquisition of Sela, it is also engaged in the development, manufacturing and marketing of automated scanning electron microscope (SEM) and transmission electron microscope (TEM) sample preparation equipment, primarily for the semiconductor industry.

As of December 31, 2011, the Company had sold more than 2,500 AOI systems in 34 countries worldwide. The Company's PCB customer base includes the majority of the 100 PCB manufacturers worldwide. As of December 31, 2011, it had sold over 300 Falcon systems to more than 25 semiconductor manufacturers, among them outsourced semiconductor assembly and test (OSAT), integrated device manufacturers (IDM) and wafer level packaging subcontractors, including eight out of the top 10 semiconductors companies.

Camtek�� AOI systems consist of an electro-optical assembly unit, either movable or fixed, which consists of a video camera, precision optics and illumination sources. The electro-optical unit captures the image of the inspected product; a precise, either movable or fixed table, that holds the inspected product, and an electronic hardware unit, which operates the! entire system and includes embedded components that process and analyze the captured image by using its algorithms. Its systems can also compile and communicate statistical reports of inspection findings through the customer�� factory information system. The Company offers a range of systems for automated optical inspection of semiconductor wafers, IC substrates and PCBs. These systems are used to enhance production yields and assist in controlling manufacturing processes at wafer fabrication, test and assembly houses, and PCB plants worldwide.

The Company�� Falcon systems are designed for the back end market of the semiconductor industry. The Falcon�� advanced algorithms and inspection capabilities enable its dedicated models to detect defects in the die, which, if left undetected, may cause failure. The Condor is designed to meet the current and future inspection needs of the semiconductor industry. The Condor, through algorithms and advanced hardware configuration, is designed to enhance two dimensional (2D) and three dimensional (3D) detection abilities and increased throughput. The Condor family includes models for: 3D and 2D metrology and inspection of bumped-wafer prepared for packaging in the flip-chip technology; 2D metrology and inspection of finished wafers at the end of their manufacturing process and in test houses; Post-dicing inspection of frame-mounted wafers at assembly and packaging facilities, where it adds the value of detecting dicing-related damage, and inspection and metrology of micro-electro mechanical systems (MEMS) and other special applications.

Condor 5LED is an AOI system designed to provide solutions to a range of requirements that are to light emitting diode (LED) semiconductor manufacturers. The LED market�� special inspection requirements are characterized by 3-6 inch wafers, each of which may contain between 100 to over 200 thousand LED devices per wafer. Typically, the wafer is made of a translucent compound semiconductor, such as g! allium ar! senide, gallium phosphide and/or indium phosphide. The Gannet system is designed for the front end market of the semiconductor industry.

The Company�� AOI products for this industry consist of five product lines: the Phoenix, Dragon and Orion for the inspection of inner and outer layers of PCB panels and ultra-fine-line IC substrate; large area masks (LAM) dedicated for inspection of artwork; and the Pegasus for final inspection (AFI) of IC substrates and high density interconnect (HDI) panels. The Phoenix product family, introduced in November 2011, is designed to support a range of the demanding PCB and IC substrate applications, while keeping in pace with the dynamic technology changes in the industry. The Phoenix product family is enhanced with Spark - Camtek's and detection engine providing high detection capabilities, while minimizing false calls.

Dragon systems are high-throughput, automation-ready systems for inspection of all PCB types in a mass production environment. Dragon models are optimized for specific PCB technology ranges - from mainstream circuits of typically 100 (microns) conductor line width, up to high density substrates having 12 (microns) wide conductive lines. All Dragon models are designed to interface with automated material handling mechanisms provided by the Company or other automation suppliers. Orion systems are stand-alone AOI systems for high volume inspection of all PCB types designed to operate in inspectify mode of operation. Inspectify is a mode of operation enabling the operator to perform verification immediately after inspection on the same system, thus saving time and eliminating handling-related defects.

LAM is specially designed for main-stream LAM inspection. It offers unparalleled detection ability on LAM with down to 25 (microns) line/space width technology. The LAM incorporates advanced technology innovations to ensure the level of detection that these masks require at this critical production stage. Camtek offers! various ! stand-alone verification systems that enable verification of panels after inspection. The Pegasus line includes systems for automated inspection of finished IC substrates that are subsequently used in packaging of ball grid array (BGA) and Chip Scale Package (CSP) devices. The Pegasus inspects both sides of the substrate, detecting process and mechanical defects, in particular in the gold-plated areas, where the substrate will interconnect with the silicon die or the PCB, and in the solder-mask areas. Pegasus models handle substrates in strip format in magazines.

GreenJet is a SM digital printing system aimed to replace the conventional SM application lines for prototypes and high mix low volume production. The GreenJet system offers manufacturers flexible and digital SM printing technology solution. The LGP system incorporates PCB digital legend printing technologies with specially developed heat curable ink, resulting in output and system performance. Camtek has developed the inks for both LGP and GreenJet, which involves different chemicals mixed together in order to reach the required ink characterization.

The Company competes with Rudolph Technologies Inc., KLA-Tencor Corporation, Topcon Corporation, Toray Industries, Inc., Hitachi Ltd., Nidec Tosok Corporation., FEI Company, SII Nanotechnology Japan, Carl Zeiss, Inc., Orbotech Ltd., Dainippon Screen Manufacturing Company, Lloyd-Doyle Limited, Gigavis Co. Ltd., ATI Electronics Pty Ltd., Shirai Electronics Industrial Co. Ltd., First EIE SA and MicroCraft K.K.

Advisors' Opinion:

• [By James E. Brumley]

  In retrospect, their pullbacks come as no real surprise. Neither Voxeljet AG (NYSE:VJET) nor Camtek LTD. (NASDAQ:CAMT) saw their shares soar on any news that was meaningfully sustainable, and after the "shoot first, ask questions later" market had a chance to start asking questions, it became clear that - even with the largest of glimmers of corporate progress unveiled a few weeks ago - CAMT and VJET both had been bid up more on hype and less on substance. Meanwhile (and this could be bitterly ironic to some), a small cap play in the same 3D printing space that (1) didn't beat the daylights out of its hype-drum, and (2) is actually much closer to bringing a revenue-bearing product to the market [per today's news - more on that below] isn't getting anywhere near the same attention. That company? Makism 3D Corp. (OTCBB:MDDD). The good news is, MDDD finally looks like it's revving its engine, while Camtek and Voxeljet AG shares continue to deteriorate.

• [By Paul Ausick]

  Then there�� Camtek Ltd. (NASDAQ: CAMT) with a far more modest forward multiple of 17.6 as of today. But Camtek doesn’t have a 3D printer for sale yet, it only referred to a 3D printer during its November earnings conference call, saying that it was still too early for the company to estimate the impact of a planned 2014 introduction for its 3D printing device that will produce printed circuit boards (PCBs).

• [By James E. Brumley]

  Investors who've made a point of keeping tabs on the 3D printing craze this year will know that a pair of small caps in this space - Camtek LTD (NASDAQ:CAMT) and Voxeljet AG (NYSE:VJET) - have dominated the headlines in just the past few weeks. For CAMT, the big news was the recent announcement that it would be the first 3D printer maker to develop a product that could print circuit boards. As for VJET, news that it was going to greatly expand its on-demand-printing capacity (for customers that need smaller occasional jobs but don't want to buy a printer of their own) lit the stock up quite nicely.

Top Shipping Companies For 2014: Cooper Companies Inc (COO)

The Cooper Companies, Inc., incorporated on March 4, 1980, is a global medical device company. The Company operates through two business units, CooperVision, Inc. and CooperSurgical, Inc. CooperVision is a global manufacturer providing products for contact lens wearers. CooperSurgical focuses on supplying women's health clinicians with products and treatment options to improve the delivery of healthcare to women.

CooperVision develops, manufactures and markets a range of monthly, two-week and single-use contact lenses, featuring advanced materials and optics. CooperVision's products are designed to solve vision challenges such as astigmatism, presbyopia and ocular dryness with a collection of spherical, toric and multifocal contact lenses. CooperVision's products are primarily manufactured at its facilities located in Hampshire, United Kingdom, Juana Diaz, Puerto Rico, and Scottsville, New York. CooperVision distributes products from West Henrietta, New York, Fareham, United Kingdom, Liege, Belgium, and various smaller international distribution facilities. Under the Biofinity brand, CooperVision has launched monthly silicone hydrogel spherical, toric and multifocal lens products. CooperVision has also launched two-week silicone hydrogel spherical and toric lens products under its Avaira brand. During the fiscal year ended October 31, 2013 (fiscal 2013), the Company launched MyDay, its single-use spherical silicone hydrogel lens, in Europe. CooperVision's Proclear line of spherical, toric and multifocal lenses are manufactured with omafilcon, a material that incorporates Phosphorylcholine (PC) Technology that helps enhance tissue-device compatibility.

CooperSurgical offers an array of products used in the care and treatment of women's health. The Company participates in the women's healthcare market through offering quality products, technologies and service to clinicians worldwide. CooperSurgical collaborates with clinicians to identify products and new technologies from dis! posable products to instruments and equipment. The result is a portfolio of products that aid in the delivery of improved clinical outcomes that healthcare professionals use routinely in the diagnosis and treatment of a wide spectrum of women's health issues.

The Company competes with Johnson & Johnson Vision Care, Inc., CIBA Vision, Bausch & Lomb Incorporated, Boston Scientific, Johnson & Johnson's Ethicon Endo-Surgery and Ethicon Women's Health and Urology companies, Gyrus ACMI and Covidien.

Advisors' Opinion:

• [By Chuck Carnevale]

  The following example looking at Cooper Cos. Inc. (COO), and reveals a very cyclical company that provides insight into the PE equals 15 hypotheses that this series of articles has presented. Clearly, price follows earnings even when earnings are dropping, and interestingly, the market tends to apply our standard PE equals 15 even when this happens.

Top Shipping Companies For 2014: Oak Ridge Energy Technologies Inc (OKME)

Oak Ridge Energy Technologies, Inc., formerly Oak Ridge Micro-Energy, Inc., incorporated on August 15, 1986, is a development-stage company. The Company licenses thin-film, solid-state batteries for industrial, government, and medical applications. The Company�� thin-film battery is rechargeable, lithium-based, and the active battery layers are thinner than common plastic wrap.

The Company�� batteries are intended for applications, such as wireless smart sensors, which operate in harsh environments, security cards, radio frequency identification (RFID) tags, semiconductor non-volatile memory chips, and implantable medical devices. Its prototype cells on ceramic substrates supplied to customers are 0.024 of an inch (0.62 millimeters) thick. Thin-film lithium and lithium-ion batteries are ideally suited for a variety of applications where a small power source is needed.

The Company competes with Infinite Power Solutions, Inc., Front Edge Technology, Inc., Cymbet Corporation, Teledyne Electronic Technologies, Excellatron and Planar Energy Devices, Inc.

Advisors' Opinion:

• [By CRWE]

  Today, OKME has shed (-7.69%) down -0.050 at $.600 with 2,446 shares in play thus far (ref. google finance Delayed: 9:56AM EDT July 15, 2013), but don�� let this get you down.

  Oak Ridge Micro-Energy, Inc. previously reported a strategic US $2.5M investment by Precept Fund Management SPC�� on behalf of Prescient Fund SP into the revitalised US battery company Oak Ridge Micro-Energy.

  Mr. Steve Barber, Principal of Precept Investment Management Limited, the investment manager of Precept Fund Management SPC said:

  ��lobally the energy storage sector is projected to be a US$60 Billion market by 2020. Precept�� $2.5m placement into OKME is a strategic move by the fund to secure a significant share of this exciting company and the growth potential of the battery market. Our opinion is that OKME has a world leading technical and commercial team, a focused business development strategy and the reputation to be a key player in the US and global battery market. OKME is one of only two investment targets the Fund identified after an in-depth analysis of the energy storage market. The other is a Swiss battery company named Leclanche. Precept is a long-term, active participation, value investor, and we look forward to a long and rewarding relationship with OKME.��/p>

• [By CRWE]

  Today, OKME has surged (+6.67%) up +0.050 at $.800 with 10,090 shares in play thus far (ref. google finance Delayed: 10:52AM EDT July 18, 2013).

  Oak Ridge Micro-Energy, Inc. previously reported a strategic US $2.5M investment by Precept Fund Management SPC�� on behalf of Prescient Fund SP into the revitalised US battery company Oak Ridge Micro-Energy.

  Mr. Steve Barber, Principal of Precept Investment Management Limited, the investment manager of Precept Fund Management SPC said:

  ��lobally the energy storage sector is projected to be a US$60 Billion market by 2020. Precept�� $2.5m placement into OKME is a strategic move by the fund to secure a significant share of this exciting company and the growth potential of the battery market. Our opinion is that OKME has a world leading technical and commercial team, a focused business development strategy and the reputation to be a key player in the US and global battery market. OKME is one of only two investment targets the Fund identified after an in-depth analysis of the energy storage market. The other is a Swiss battery company named Leclanche. Precept is a long-term, active participation, value investor, and we look forward to a long and rewarding relationship with OKME.��/p>